Home › Blog › Streaming and Internet

WiFi Installation Price vs DIY: What You Really Save

Streaming and InternetBy our Rondebosch DStv teamUpdated 11 October 20269 min read

Most people look at a WiFi installation price, then look at a router in a shop window, and think they can save the difference. Sometimes that's true. In Rondebosch, though, plenty of DIY jobs end with a second router, a box of extenders and the same dead bedroom, so the real saving is often smaller than it looks.

Quick answer

Doing it yourself saves the labour part of a WiFi installation price, and that's a fair saving in a small flat. In a big Victorian house with thick walls, a garden cottage or a full student house, DIY often costs more over time in wasted gear, lost evenings and weak rooms. Ask our team for a current quote and compare honestly.

What you pay for in a WiFi installation price

A paid job is more than plugging in a box. You're paying for someone to walk the house, find where the signal dies, choose the right equipment and place it properly. Then it gets tested room by room before anyone leaves.

On a typical job our team will:

  • check where your fibre or LTE router sits and whether it can move
  • test signal strength in every room you actually use
  • pick between one better router, a mesh system or cabled access points
  • run and terminate network cable where wireless won't reach
  • set up the network name, password and a separate guest network
  • connect your smart TV, decoder and printers, then test them

That last step matters more than people think. A decoder like the DStv Explora Ultra decoder has built-in WiFi and streaming apps, so a weak connection in the lounge shows up as buffering on movie night.

The hidden costs of doing it yourself

DIY looks free once the hardware is paid for. The costs hide in the places nobody budgets for.

Buying the wrong kit first

The most common story we hear goes like this. Someone buys a plug-in extender, it halves their speed, so they buy a second one. Then they buy a mesh kit and put the extenders in a drawer.

That drawer of gear is part of what DIY really costs. A short site visit before buying anything usually prevents it.

Your own time

Setting up a mesh system is quick when it works. When the nodes won't talk to each other through a double-brick wall, it can eat a whole Saturday, and you still won't know if the placement is right.

Cable runs that need tools and ladders

Running network cable through a ceiling or under a floor is where DIY gets risky and expensive. You need the right cable, crimping tools, a tester and a safe way into the roof space. It's the same kind of careful work that goes into a new DStv installation, just with a different cable.

Safety first

Please don't crawl into an old ceiling to run cable on your own. Older Rondebosch roofs can have fragile boards, old wiring and no safe walkway. Keep away from mains power and leave ladders and roof spaces to someone with the right gear.

DIY versus a paid WiFi installation price, side by side

Here's how the two routes usually compare on the jobs we see around the southern suburbs. There are no prices in the table on purpose, because every house is different and we quote first.

TaskDoing it yourselfPaying a technician
Choosing equipmentGuesswork from reviews, easy to overbuy or underbuyChosen after testing your rooms and walls
Router placementUsually wherever the fibre box was fittedMoved or extended to the centre of the home
Thick walls and long passagesExtenders that cut speedMesh with cable backhaul or wired access points
Garden cottage or flatletOften no signal at allCabled link or outdoor point to point
Smart TV and decoderLeft on weak WiFiCabled where possible, tested on streaming
Time spentAn evening to a few weekendsUsually one visit

If the table looks one-sided, it isn't meant to be. For the first two rows, a careful DIYer can do fine.

Need DStv installers in Rondebosch?

Tell us what you need or what your screen is showing. We give you a clear price before we drive out.

Jobs you can safely do yourself

Before you pay anyone, try these. They cost nothing and fix a surprising number of home WiFi complaints.

  1. Switch the router off at the wall for a minute, then back on, and wait for all the lights to settle.
  2. Lift the router off the floor and out of cupboards. Put it on a shelf in the open, away from the microwave.
  3. Log into the router's app and give the 2.4GHz and 5GHz bands clear names, so you know which one you're on.
  4. Plug the decoder or smart TV straight into the router with a network cable if they're close enough.
  5. Walk around with your phone and note which rooms drop off. That list is gold when you ask for a quote.

If that sorts it out, you've saved the full cost. If it doesn't, you've done half the diagnosis already.

Where Rondebosch homes catch out DIY setups

Our area has a few building types that make wireless signal behave badly. Knowing which one you live in tells you a lot about whether DIY will work.

Victorian and Edwardian houses

The old homes on the streets between Rondebosch and Rosebank have thick brick walls, high ceilings and long central passages. WiFi from a router in the front room struggles to reach a kitchen at the back.

A single stronger router rarely fixes this. What works is a mesh system with a cable between the units, or one or two access points wired back to the router.

Flats and student digs

Blocks of flats in Mowbray and Observatory are the opposite problem. The space is small, but dozens of neighbouring networks crowd the same channels.

A student house near UCT can also have six or eight people streaming at once. Here a better router and smart channel settings often beat more hardware, and DIY can go well. Our post on communal DStv for flats covers the TV side of shared buildings.

Garden cottages and back rooms

Many homes in Newlands and Claremont have a flatlet or study across the garden. WiFi through two outside walls and a stretch of lawn under big oaks is unreliable.

That's a classic case for proper network installation, either a buried or clipped cable run or a small outdoor link between the buildings.

Technician tip

If you're already having a TV point or dish cable run to a cottage, ask for a network cable to be pulled at the same time. Sharing one trench or ceiling route is cheaper than two separate jobs.

When paying the WiFi installation price makes sense

Here's a simple rule we give neighbours. If your problem is one room, try DIY first. If it's half the house, a second building or a home office you rely on, pay for it to be done once and done right.

It also makes sense when the WiFi feeds other things. Our CCTV installation work often runs over the same network, and cameras that drop off are no help at all.

The same goes for streaming TV. If you watch on DStv Stream or have an Explora Ultra, read our guide to linking DStv Stream on a smart TV once the WiFi is sorted.

How to choose a WiFi installer

Typing wifi installation companies near me gives you a long list, and they don't all do the same job. Some just sell a router. Others survey, cable and test.

  • Do they visit or test before quoting?
  • Will they explain why they chose mesh, access points or cable?
  • Do they test every room with you before leaving?
  • Will they tidy cables along skirtings and through ceilings?
  • Do they also handle TV, decoder and camera connections?

We tick all of those, and because we also do DStv installation in Rondebosch, we can sort the decoder, smart TV and WiFi in one visit. If you'd like a TV moved while we're there, our TV wall mounting team can help too.

Book a WiFi check in Rondebosch

Send us your list of weak rooms and a rough layout of the house, and we'll tell you honestly whether DIY will do. If it won't, see our WiFi and network installation page, then contact our team for a quote before we drive out. We cover Rondebosch, Rondebosch East, Pinelands, Kenilworth and the rest of the southern suburbs.

WiFi installation price: FAQs

Is a WiFi installation price worth it for a small flat?

Often not. In a one or two bedroom flat a decent router in a central spot usually covers everything. Try moving the router and changing the channel first. If a room still drops out, a short visit to check placement costs far less than buying the wrong mesh kit.

Can I install WiFi myself?

Yes, a router or mesh system is designed for home setup and many people manage it. The hard parts are choosing where the units go and running cable through ceilings or to a cottage. Those are the bits where paying a technician usually saves money and time.

How much does WiFi installation cost at home?

It depends on the size of the house, the walls, how many rooms need coverage and whether cable has to be run. A simple router setup is the cheapest job and cabled access points cost more. We don't use a fixed price list, so ask our team for a current quote.

Why does my WiFi not reach the back of my Rondebosch house?

Older Rondebosch homes have thick brick walls and long passages that soak up wireless signal. A router at the front of the house can't push through several of those walls. A mesh system with cable between the units, or a wired access point at the back, usually fixes it.

Do extenders save money compared to a WiFi installation price?

They're cheap to buy, but a basic plug-in extender usually cuts your speed and adds a second network to juggle. In a big house you often end up replacing them with mesh anyway. Use one as a stop-gap, not as the long-term plan.

Talk to our Rondebosch team

Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.