Home › Blog › Packages and Prices

How Much Does an OpenView Decoder Cost to Set Up? Price Guide

Packages and PricesBy our Rondebosch DStv teamUpdated 14 October 20267 min read

If you're wondering how much an OpenView decoder costs to set up, here's the honest bit first: the box is the cheap part. The OpenView decoder price doesn't swing much, but the dish, cable and fitting depend on your Rondebosch home. A Victorian semi with a slate roof is a very different job from a third-floor flat.

Quick answer

Budget in two parts. At the time of writing, the OpenView decoder price is R799 online, or from around R599 on retail specials. Add a dish and fitting, and a bundled decoder with installation voucher comes to around R1,699. With a working dish already in place, setup can cost far less. Ask our team for a current quote.

The two parts of any OpenView setup

Think of it as hardware plus labour. The hardware is the decoder, a dish of about 80 to 85cm, an LNB and coax cable. The labour is mounting, aligning, setting up and testing.

There's no third part. OpenView has no monthly fee and no contract, so once the TV is showing channels, you've finished paying. That's a big reason it's popular with students and landlords around the flats and student digs near campus.

Part one: the OpenView decoder price itself

At the time of writing, the current WiFi-enabled decoder sells for R799 on openview.co.za. Retailers run their own deals, sometimes from roughly R599, and those come and go from week to week.

Plenty of people setting up a TV in a res room or a shared house grab the cheapest box they can find. That's fine. Just check it's the current model, keep the slip and make sure the shop will swap it if it's faulty.

Part two: dish, cable and fitting

This is where homes differ. A bundled decoder with dish and installation voucher costs around R1,699 at the time of writing. Put that next to the R799 box and you can see the dish and fitting add roughly R900.

A private installer quotes per house instead. These things push the number up or down:

  • Whether there's already a dish we can reuse
  • How far the cable has to run from the roof to the TV
  • The roof itself: corrugated iron, tiles or an old slate roof
  • Trees in the way, like the big oaks on many local streets
  • Extra TV points in other rooms
  • A bracket to put the TV on the wall

We cover all of that in one visit as part of our OpenView installation service, and you get the figure before we arrive.

What a second TV adds

Each TV that needs its own OpenView channels needs its own decoder. So a second room means a second box, plus a cable from the dish and sometimes an LNB with more outputs.

In a big house in Rondebosch East or Pinelands, that second cable might run through a ceiling and down an inside wall. It's quicker to do both rooms in one visit than to call us back a month later.

What we check before quoting

A photo of the roof and the spot where the TV will go tells us a lot. We look at the roof type, the likely dish position and any trees on the north-east side, then give you a price.

OpenView decoder price plus setup, by type of home

Type of homeWhat's usually neededEffect on the total
Flat on a working communal dishA point from the building's system and decoder setupUsually the lowest, if the system carries the signal
House with an old DStv dishCheck the LNB and cable, realign, set up the decoderOften low, because the dish stays
House with no dishNew dish, bracket, LNB and cable runClose to the bundle price, or quoted on site
Heritage roofline or tall treesA careful mounting spot, longer cable, sometimes a poleHigher, quoted on site

Blocks of flats in Rondebosch, Mowbray and Observatory often have a shared dish on the roof. OpenView comes from the same satellite position as DStv, so if the building's communal satellite system is in good shape, you may only need a point in your unit.

Need DStv installers in Rondebosch?

Tell us what you need or what your screen is showing. We give you a clear price before we drive out.

Older houses, oaks and the south-easter

Rondebosch has lovely old homes, but they make satellite work fiddly. Victorian and Edwardian rooflines are delicate, so we look for a spot on a back wall or side gable that doesn't spoil the street view.

The dish needs a clear view to the north-east, fairly high in the sky. A big oak in Newlands or Rosebank can block that view completely once the leaves are out in summer.

Then there's the south-easter pouring off Devil's Peak, plus our wet winters. A loosely fitted dish drifts, and rain fade bites harder when alignment is off. Here's why weather knocks out signal in this part of town.

Getting it right the first time, with proper dish alignment on a meter, costs less than paying for a second visit.

Ways to keep the OpenView decoder price and setup bill down

  1. Ask your landlord or body corporate whether there's a communal dish first.
  2. Look for an old DStv dish on the roof, since it can often be reused.
  3. Compare the decoder on the day, online and in store.
  4. Book one visit for everything: dish, decoder, a second point and TV mounting if you want it.
  5. Do the activation yourself, which is free.

Safety first

Don't climb onto a steep Victorian roof or the top of a block of flats to check a dish. Old roofs can be brittle, and flat roofs often have no rails. Most bodies corporate control roof access anyway, so ask them, or ask us.

What you get after the setup is paid

Once it's running, you get 20+ TV channels and radio stations with no monthly bill. Our OpenView channels list shows what's on offer. If you later decide you want more sport or movies, our DStv installation cost guide shows what that switch involves.

Good to know

You activate OpenView with the decoder's details on the OpenView website, via WhatsApp or in the OpenView app. If a channel goes missing later, a rescan from the decoder menu usually brings it back.

Book an OpenView setup quote in Rondebosch

Tell us if you live in a house or a flat, how many TVs you want and whether there's a dish already. We quote first and test the signal with you before we leave. Reach us through the contact page, or call 072 237 6363.

Our team of DStv installers in Rondebosch also works in Claremont, Kenilworth and Pinelands, often the same or next day depending on the schedule.

OpenView decoder price: FAQs

How much does an OpenView decoder cost to set up in Rondebosch?

It depends on what's already on your roof. At the time of writing, the decoder alone is R799 online, and a decoder with dish and installation voucher is around R1,699. A flat on a working communal dish usually costs less. Ask our team for a current quote.

What is the OpenView decoder price in South Africa?

At the time of writing, the current WiFi-enabled decoder is R799 on openview.co.za. Retailers sometimes run specials from around R599. Prices change, so compare on the day and check what is in the box before paying.

Is the OpenView decoder with installation price worth paying?

For a home with no dish, usually yes. The bundle or an installer quote covers the dish, cable, fitting and alignment, which you would otherwise have to buy and arrange yourself. If you already have a good dish, the decoder on its own may be enough.

Can I use OpenView in a student flat?

Often, yes. If the building has a shared dish that carries the satellite signal, you may only need a cable point and a decoder. If there is no shared system, you need permission from the landlord or body corporate before a dish goes up.

Does OpenView need a new dish?

Not always. OpenView uses the same satellite position as DStv, so an existing DStv dish can often be reused. A technician should check the LNB and cable first, because old parts are a common cause of poor signal.

Talk to our Rondebosch team

Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.