A communal system replaces a roof full of individual dishes with one properly installed dish and a multiswitch that feeds every unit. Each flat gets its own feed and its own decoder, so residents keep their own subscriptions, but the building only carries one set of hardware and one set of holes in the roof.
Rondebosch has a lot of blocks of flats and complexes with a body corporate, and quite a few of them are still running on whatever accumulated over the years. We survey what is there, tell the trustees plainly what is worth keeping, and quote on a system with enough outlets for every unit plus room to grow.
- Survey of existing cabling and outlet count per unit
- Single dish position agreed with the body corporate
- Multiswitch sized with spare outlets for future units
- Every riser and outlet labelled to its own unit
- Signal readings recorded at each outlet on handover
How we do it
Communal / Complex DSTV Installation in Rondebosch, done properly
Working with the body corporate
Trustees need a scope they can put to a meeting, not a verbal promise. We quote in writing, set out where the dish and the multiswitch go, and hand over the readings and the labelling at the end so the next contractor is not guessing. We can also work in phases where the budget runs across financial years, starting with the dish and the head end.
Clearing individual dishes off the roof
Once a communal feed is in, the individual dishes come down and the fixing holes get sealed. That matters in Rondebosch, where Cape winter rain finds every open penetration on a flat roof, and where a row of old brackets on a parapet is both a leak risk and an eyesore. We do the removals and the making good as part of the project.
Line of sight for a whole building
One dish has to serve everybody, so the position has to be right first time. We check the path against the mature oak and plane canopy that surrounds many of the older complexes here, and against neighbouring double storey buildings. On a mountain side suburb the path can sit lower than people expect, so we take readings from the actual proposed position before anything is fixed.
Common questions
Communal / Complex DSTV Installation in Rondebosch: your questions answered
Do residents keep their own DSTV accounts?
Yes. A communal system carries the signal, not the subscription. Each unit plugs its own decoder into its own outlet and keeps its own account and package. The body corporate is responsible for the dish, the multiswitch and the cabling up to the wall plate, and nothing beyond that.
Can you add a unit to an existing communal system?
Usually, if the multiswitch has a spare output and there is a cable route to the unit. That is why we size new systems with spare outlets. Where the multiswitch is full we can cascade or replace it, and we tell the trustees which option is cheaper over the life of the system.
Who is responsible when a flat has no signal?
We test at the outlet to settle it. If the reading at the wall plate is good, the fault is inside the unit, which is the resident's side. If the outlet is dead, it is the communal cabling or the multiswitch and sits with the body corporate. The labelling we leave behind makes that a quick check.
Will one dish be enough for the whole complex?
One dish and the correct multiswitch will serve a Rondebosch block comfortably, provided the position has clean line of sight and the cable runs are within spec. Very large complexes, or buildings split across separate roofs, sometimes need a second head end, which we would identify at the survey stage.
Related services
Other DSTV work we do in Rondebosch
Ready to book
Book communal / complex DSTV installation in Rondebosch
We work Monday to Saturday across Rondebosch and the suburbs around it, with emergency callouts when a business is down.