Questions to Ask an OpenView Installer Before You Book
A few minutes on the phone can save you a wasted afternoon and a dish that drifts off the satellite by June. Before you book an OpenView installer in Rondebosch, ask the questions below. They're the same ones we'd want answered if a stranger were coming to drill holes in our own Victorian walls.
Quick answer
Ask an OpenView installer what the quote includes, whether your existing dish can be reused, which extras cost more, how they'll route the cable, whether they test every channel with you, and what happens if the signal fails a week later. Clear, specific answers and a price before the visit are the signs of a sound booking.
Start by asking the OpenView installer about the job
Begin with what you actually need. Many people phone for "OpenView" without knowing if they need a full setup or only a decoder connected to an old dish.
Can you reuse the dish I already have?
OpenView comes from the same satellite position as DStv, Intelsat 20 at 68.5 degrees East. So an old DStv dish is often usable. A careful installer will say "probably, but I'll check the LNB, cable and bracket first", rather than promising either way over the phone.
Do I buy the decoder, or do you supply it?
Some people arrive with a box from a shop special. Others prefer the installer to bring one. Neither is wrong, but you need to know who's responsible if the box turns out to be faulty.
How many TVs will this cover?
One decoder feeds one TV. If you'd like OpenView in the lounge and a back bedroom, say so up front, because that means a second decoder and another cable. Our OpenView setup for extra rooms is easier to plan in one visit.
Questions about the OpenView installation price
OpenView has no subscription and no contract, so the setup is your main cost. That's why it pays to ask about money before the van leaves the yard.
- Is the price fixed once you've seen photos, or only after you arrive?
- Does it include the dish, LNB, bracket, cable and connectors?
- Is there a call-out fee on top?
- What's charged per metre if the cable run is long?
- Do you charge extra for a double-storey or a steep roof?
As a guide, at the time of writing, the decoder alone sells for about R799 on openview.co.za, and a decoder bundle with an installation voucher sits around R1,699. Your own openview installation price depends on your roof and cable run, so ask our team for a current quote. Our post on OpenView decoder setup costs breaks the figures down further.
Good OpenView installer answers versus warning signs
You won't always know the technical detail, but you can judge how someone answers. This table helps.
| You ask | A good answer | A warning sign |
|---|---|---|
| What's in the price? | A list of parts and labour | "Don't worry, it's all in" |
| How do you align the dish? | With a signal meter, checking quality | "I just use my phone" |
| Where will the cable go? | Clipped neatly, sealed where it enters | No plan until they're on site |
| Do you test before leaving? | Yes, every channel, with you watching | "It'll come right by itself" |
| What if it drops next week? | A clear call-back arrangement | Vague or no reply |
Questions only a Rondebosch home raises
Our suburb throws up a few things a generic checklist misses. Raise them early so the OpenView installer arrives with the right fixings.
Will the oaks block the signal?
The dish needs a clear view roughly north-east and fairly high up. Big oaks along the streets towards Newlands and Rosebank can sit right in that line, and they grow every year. Ask whether the installer will check the view before choosing a spot.
How will you fix the bracket to an old wall?
Victorian and Edwardian homes often have soft brick, plaster mouldings and pressed-metal roofs. The wrong plugs crumble the wall, and a loose bracket drifts every time the south-easter howls off Devil's Peak. A sensible installer looks for solid masonry, not the easiest spot.
Need DStv installers in Rondebosch?
Tell us what you need or what your screen is showing. We give you a clear price before we drive out.
Do I need permission from the body corporate or landlord?
In flats in Mowbray, Rondebosch East or Observatory, the roof usually isn't yours. Many blocks have rules on where dishes go, and some already have a shared system. Our piece on communal TV in flats explains how shared setups work, and why you should get permission in writing first.
Good to know
Students in digs near UCT often move every year. If that's you, ask whether the bracket can be removed cleanly at the end of the lease, and whether the installer can move the dish to your next place later.
On the day: what to ask before they leave
The work isn't done when the picture appears. Before the installer packs up, run through this short list together.
- Ask to see the signal strength and quality readings on the decoder screen.
- Flick through every channel, including the radio stations.
- Check the outdoor connectors are sealed against the wet Cape winter.
- Confirm the decoder is activated, or ask them to show you how to do it on openview.co.za, WhatsApp or the app.
- Ask how to rescan channels from the menu if something goes missing.
Activation is quick, and our OpenView channels list shows what you should be able to find after the scan.
Safety first
Don't go up a ladder to "help" while the dish is being fitted, and keep children and pets away from the work area. Heritage roofs can be fragile, and wet slate or tin is slippery.
Answers that should make you think twice
Most people in this trade are honest. Still, a few replies suggest you might want a second quote:
- Claims to be "official OpenView" or tied to DStv. OpenView belongs to eMedia, and no MultiChoice tie-in applies.
- A price that changes once they're on your roof, with no new reason given.
- Refusing to say what's included until you've paid a deposit.
- No mention of a signal meter at all.
If you've had a bad visit before, our technician booking checklist covers the same habits for satellite work in general.
What we answer before you even ask
When you contact us, we'll ask for a photo of where the dish will go and of any old dish already on the wall. Then we quote first, so you know the figure before we drive out.
We also check whether a fresh OpenView decoder and dish installation is needed, or whether realignment with our satellite dish alignment service will do. Our team works to proper installation standards, and we test every channel with you before we leave.
Book your OpenView installer in Rondebosch
Got your answers? Then you're ready. Our OpenView team covers Rondebosch, Claremont, Kenilworth, Pinelands and the rest of the southern suburbs. You'll find everything else we do on the DStv installers in Rondebosch homepage.
Phone or WhatsApp 072 237 6363, or send your photos through our contact and booking page. We often fit the visit in the same or next day, depending on the schedule.
OpenView installer: FAQs
What should I ask an OpenView installer before booking?
Ask what the quote includes, whether your old dish can be reused, what extras cost, how the cable will be routed and whether every channel gets tested with you. Also ask what happens if the picture drops a few days later.
How much does an OpenView installer charge?
It depends on whether you need a new dish, how long the cable run is and how tricky the roof is. At the time of writing, a decoder bundle with an installation voucher sits around R1,699. Ask for a written quote before the visit.
Can an OpenView installer use my old DStv dish?
Often, yes. OpenView and DStv use the same satellite position, so the dish already points the right way. The installer should check the LNB, cable and bracket, because worn parts can spoil the signal even if the dish looks fine.
Do I need body corporate permission for OpenView in a Rondebosch flat?
Usually, yes. In most Rondebosch blocks the roof and outside walls are common property, so you'll need the body corporate or landlord to agree. Some buildings already have a shared dish system you may be able to join.
How long does an OpenView installation take?
A straightforward job on a single-storey house often takes a couple of hours, including alignment, setup and testing. Long cable runs, a second TV or a difficult roof add time. Your installer should give you a rough idea when quoting.
Talk to our Rondebosch team
Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.